Datacom Systems 2X16SP-1000BT, Руководство пользователя

Страница: 25 / 30

Installation 25
© 2007 Datacom Systems Inc
4.3.2 Control-Link Connection
NOTE:
Only the first 2X16SP-1000BT Gigabit SPAN Matrix Switches in the daisy-chain must
have its IP Address configured prior to installation in the daisy-chain. Refer to the 'IP
Address in the Installation' section.
NOTE:
The 2X16SP-1000BT Gigabit SPAN Matrix Switch label
0
in the diagram is the first
switch in the daisy-chain,
1
is the second switch in the daisy-chain,
2
is the third switch in
the daisy-chain and
3
is the forth switch in the daisy-chain.
NOTE:
All the daisy-chain switches are managed through the first switch in the daisy-chain.
Step 1.
For two switches daisy-chained, connect a DRL512-2M-R cable, DB9 M/F straight
thru cable, to the
LINK
DB9 socket of the first switch (switch
0
) to the
CONTROL
DB9 socket
of the second switch (switch
1
).
Step 2.
If three switches are daisy-chained, continue. Connect a DRL512-2M-R cable, DB9
M/F straight thru cable, to the
LINK
DB9 socket of the second switch (switch
1
) to the
CONTROL
DB9 socket of the third switch (switch
2
).
Step 3.
If four switches are daisy-chained, continue. Connect a DRL512-2M-R cable, DB9 M/
F straight thru cable, to the
LINK
DB9 socket of the third switch (switch
2
) to the
CONTROL
DB9 socket of the fourth switch (switch
3
).