Installation
19
© 2007 Datacom Systems Inc
Step 12.
Hit the
Enter
key a couple of times to re-establish the connection with the 2X16SP-
1000BT Gigabit SPAN Matrix Switch and then type SHOW to review the network address
settings. Verify that the settings are correct.
Step 13.
Type EXIT to close the HyperTerminal connection and close the HyperTerminal
window responding 'Yes' to the "Are you sure you want to disconnect now?' prompt.
Step 14.
Disconnect the DRL512-2M-R serial cable from your 2X16SP-1000BT Gigabit
SPAN Matrix Switch.
Step 15.
Proceed to install the 2X16SP-1000BT Gigabit SPAN Matrix Switch in your chosen
network location.
