6
Setting Up Your Camera and SpyderLENSCAL
Position the SpyderLENSCAL as shown below, with the main target vertical
and ruler “0”
mark aligned with the center cross-section of the target. Make sure the SpyderLENSCAL
is level by placing it on a flat surface, mounting it on a tripod or on a light stand. The
bubble indicator shows the SpyderLENSCAL is level before calibration.
Attach your camera to a sturdy tripod. You want to make sure that your camera and
SpyderLENSCAL are the same height. Adjust the height of your tripod and
SpyderLENSCAL when they are next to each other. The center point on the vertical piece
of the SpyderLENSCAL should be in the center of your lens when the camera is level.
Using a light stand makes adjusting the SpyderLENSCAL to the height of the camera very
simple.
