Datacolor 500, Руководство пользователя

Страница: 17 / 48

Datacolor 800, 850, 500, and 550 Series User’s Guide

15
USB Cable Installation
Instruments manufactured by Datacolor can be connected to a USB port on a desktop
system.
See Appendix, System Requirements for USB Connection before you attempt to
connect to a USB port.
You can connect the instrument to the computer using either a serial cable, Ethernet cable,
or a USB cable. Select one of them. This section provides instructions for using the USB
cable.
NOTES
Do not connect all interface cables to the unit at the same time.
If you use the USB cable, you may need to install additional software to activate the USB
port.
See also Driver Installation below for instructions to add this software.
Before You Begin

Close all programs currently running on the system.

You will need the accessories listed below to complete the installation:

USB cable (provided by Datacolor).

USB Memory Stick or CD included with the instrument (this is required only
when installing new instruments)
Three steps must be completed to enable the USB port for use with the instrument:

Install the USB cable (as shown below).

Identify the COM port assignment for the USB port. This is accessed through the
Device Manager on the
Control Panel
included with the Windows operating
system.

Change the COM port assignment in the Datacolor applications software.
Cable Installation
The USB cable provided with the system is shown below:
One end of the cable connects to a USB port on the instrument. The other connects to a
USB port on the computer.

Connect the USB cable to the instrument and to the USB port on the back of the
computer.
To Instrument
To Computer