Datacolor 200, Руководство пользователя

Страница: 18 / 22


14 Datacolor 200 User Guide
Sample Viewing Port
When measuring small samples, you may need to verify that the correct area of the sample is being
measured.
To check the sample area being viewed by the lens:
1. Grasp the tab above the aperture plate.
2. Pull the tab down to its full horizontal position. Look at the backside of the door to see the
area of the port opening that is covered by the sample.
If necessary, adjust the placement of the sample to properly position the sample area to be
measured. The sample must completely cover the port opening.
3. Push the door back to its normal position, and start the measurement.
Tab