DataCard SD260, Руководство по установке и администрированию

Страница: 71 / 116

SD Series Installation and Administrator’s Guide 63
•
L2CoolingTime —Specify the time, in milliseconds, to wait for the card to cool
after applying the overlay in the L2 laminator before proceeding to the L1
laminator. The default is 1000 ms (1 second). Enter 0 to turn off the delay.
•
RollerTypeInstalledL1 —Specify the type of roller installed in the L1 laminator.
The options are Standard , Rubber , or Custom .
•
RollerTypeInstalledL2 —Specify the type of roller installed in the L2 laminator.
The options are Standard , Rubber , or Custom .
•
ScanBarCodeRetries —Specify the number of times the bar code scanner
should attempt to read a bar code on a serialized overlay. If the read fails, the
next read attempt advances the overlay to the next usable bar code on the
overlay. This applies only to laminators that have the optional bar code
scanner installed.
LaminateType
Use the LaminateType options to specify settings for the overlay materials used in
the laminating system.
Description
Default
Value
Current Value
(unit)
Allowed
Range
1) DatabaseVersion 1 1 [1 – 999]
2) ExclusiveOverlayInL1 Disabled
3) ExclusiveOverlayInL2 Disabled
4) OverlayDisplayed Name 0.5_mil_Clear_DG
5) OverlayLoadedInL1
Name
0.5_mil_Clear_DG
6) OverlayLoadedInL2
Name
Clear_Topcoat
105) OverlayPartNumber 0 508668
106) OverlaySpeed 160 160 [100 – 250]
107)OverlaySpeed
AdjustmentL1
0 0 [-40 – 40]
108) OverlaySpeed
AdjustmentL2
0 0 [-40 – 40]
109) OverlayTemp 160 175 [100 – 200]