20
Installing the Printer Driver
To set up IPSec Security using a printer certificate, do the following:
1.
Obtain the printer certificate and install it on the PC.
2.
Export the Printer Certificate and Certificate Authority (CA) Certificate to files.
A.
Open the Management Console by choosing Start > Run. Type mmc in
the Run dialog and click OK.
B.
Start “Certificate (Local Computer).”
C.
Open the personal store run the Certificate Export Wizard.
D.
Choose “Personal Information Exchange PKCS#12 (.PFX)” as the
format.
E.
Specify a password for the file. Allowed characters are upper and lower
case letters (A-Z), numerals (0-9), and the special characters hyphen (-),
underscore (_), open and close parentheses(), period (.), and the at
symbol (@).
F.
Note the location of the file for use later in the procedure.
G.
Export the CA Certificate also if it does not exist in file form.
3.
Power on the printer. For best results, do not send any cards to print.
4.
Use the printer LCD panel to set IPSec Mode to ON. See the
Printer LCD Panel
section of the
User Guide.
5.
Use the printer LCD panel to set IPSec Type to Certificate.
6.
Install the printer using a USB connection and install the Status Monitor. See
“Install
using a USB connection” on page 9
and
“Installing the Status Monitor” on
page 30
for the steps to follow.
7.
Open the Status Monitor as an administrator. See the
Open the Status Monitor
section
in the
User Guide
.
8.
Click the Printer Select tab. It shows the Security settings chosen on the printer in
steps 4 and 5 above. Do the following:
A.
Click Details. The IPSec setting dialog box opens.
B.
Choose the correct choice from the Download Type list.
Содержание RL90
Страница 45: ...42 Installing the Printer Driver ...
