![background image](http://html.mh-extra.com/html/datacard/datacard-sp35/datacard-sp35_installation-manual_511355161.webp)
19
SP Series Info Central: Troubleshooting
The topcoat shows wavy
lines along the length of the
card (woodgrain or clouds).
The temperature for applying
topcoat is too high.
Lower the laminator
temperature for this material
.
The topcoat shows opaque
areas along a short edge of
the card (clouds).
The temperature for applying
topcoat is too high.
Contact your service provider
for guidance in correcting this
problem.
The topcoat has a spotty
appearance, especially on
the leading edge of the card.
The supply material was
attached to the take-up spool
and then wound in the wrong
direction.
The next card should process
correctly. If it does not,
remove the cartridge and turn
the take-up spool clockwise
several turns.
What you see
Possible causes
Solutions
Содержание Datacard SP35
