CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide
87
Multihopper
The Multihopper settings define values for the multi-hopper. Multihopper settings are available
to WebService access-level users only.
Manufacturing
The Manufacturing settings define values for card movement in the printer. Manufacturing
settings are available to WebService access-level users only.
Update Password
WebAdmin access-level personnel can specify to password protect Printer Manager and limit
access to the advanced settings. Adding password protection is the preferred method of
restricting access to Printer Manager. If no password is assigned, a password is not needed to log
on to Printer Manager.
Do the following to change the password:
1.
Select the access level for which you want to assign a password. The WebAdmin access level
can update the WebAdmin, WebUser, SnmpRwCommunity, and SnmpRoCommunity
passwords.
2.
Enter the current password. If a current password is not set, leave this field blank.
3.
Enter the new password in the corresponding field. To remove a password, leave this field
blank.
4.
Enter the new password again to confirm it. Leave the field blank if you are removing the
password.
5.
Click Update Password to apply the changes.
The Multihopper setting displays in the Printer Setting menu only when a multi-hopper
is attached to the printer.
Description
Value
Choose Username to Update
WebAdmin
Current Password
New Password
Confirm New Password
Содержание CR825
