DataCard CR500, Инструкция по установке и руководство администратора

Страница: 101 / 106

CR500 Instant Issuance System Installation and Administrator’s Guide A-7
Option MG:
None
ISO
Displays the type of magnetic encoder installed.
IC Antenna:
None
Installed
Displays whether the contactless card option is
installed:

None: A contactless card option is not installed.

Installed: A contactless smart card option is
used.
IC Contact:
None
ISO Type
Displays whether the contact card option is
installed:

None: A contact card option is not installed.

ISO type: The type of contact card option
installed.
Contact IC R/W:
None
Installed
Displays whether the contact card R/W option is
installed:

None: The R/W option is not installed.

Installed: An Internal Contacts for External
Reader option is installed.
Bend Remedy HR:
None
Installed
Displays whether the bend remedy option is
installed.
Turn Over:
None
Installed
Displays whether the turnover (duplex) option is
installed.
MG ISO Type:
Loco
Hico
JIS Type:
Loco
Hico
Displays the coercivity value set using Printer
Manager for writing data to magnetic stripe cards (if
the magnetic stripe option is installed):

Loco: 238 x 102 [A/m] (300[Oe])

Hico: 218 x 103 [A/m] (2750[Oe])
Refer to “MagStripeGeneral” on page 68 for more
information.
Retry Count:
0, 1, 2, 3
Displays the value set using Printer Manager. Refer
to
“MagStripeGeneral” on page 68 for information
on setting the retry value.
Menu Display Settings Function