DataCard 150i Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 36

DataCard 150i Скачать руководство пользователя страница 15

150i Desktop Card Personalization System

9

Loading a Single Card

A single card loaded in the Single Card Track will be personalized by the 150

i

system before any cards loaded in the Input Hopper. To manually load a single
card, perform the following steps:

The 150

i

system must be in the Ready Mode before loading a single card. Do

not insert a card while the 150

i

system is processing cards. Do not place more

than one card in the Single Card Track. The Input Hopper Card Weight must
be present for the reliable feeding of cards.

1.

Open the Single Card Access Door.

2.

Place a single card on the Single Card Track, with the front of the card up and
the top edge of the card toward the back of the 150

i

system.

If you are encoding Magnetic Stripe cards, place the Magnetic Stripe face
down and toward the rear of the 150

i

system. If the optional front Smart Card

Module is being used, insert the Smart Card so the chip is facing up and to
the left as shown. If the optional rear Smart Card Module is being used, insert
the Smart Card so the chip is facing down and to the right. Contactless cards
can be encoded with the card positioned either way.

3.

Close the Single Card Access Door. The single card is the next card in the
stack to be personalized.

«
...
13
14
15
16
17
...
»

Содержание 150i





































Отзывы:

Нет отзывов