Data Video SE-700, Инструкция по эксплуатации

Страница: 46 / 55

46
1. After the SE-700 is powered on, Multiview will be displayed on the monitor. Input 1 window displays
the Fill Source, Input 2 window displays the Key Source, Input 3 window displays the camera image
and Input 4 window displays the iPad screen (inputs can be configured under the “ Inputs ” option).
2. Press the “ MENU ” button on the SE-700 Control Panel to open the OSD menu on the Multiview
monitor and then select “ DSK ” option.
3. CG Overlay input setting (Input 1 / Input 2): Set the Key Source to Input 2 and Fill Source to Input 1.
Start DSK Linear Self
Keyer
Keyer Ctrl Lift
0
Gain
0.0
Opac
100
P-in-P Key Source Input 4 Fill Input 4
P-in-P Keyer
DSK
Stills Mask Left 0.0 Right 0.0
User Mems Top 0.0 Bot 0.0
Inputs
Outputs
Setup
4. Select a background image under the “ Stills ” option before performing Chromakey configuration.
Start
Load Still Load Still Num
10
Still FS3
Keyer Thumbnail
Picture - 1
Thumbnail Picture
Thumbnail
P 1 P-in-P
P-in-P Keyer
DSK Save Still Save Still FS3 Still Num 10
Stills
User Mems Freeze 1 Live 2 Live 3 Live
Inputs 4 Live Freeze
Outputs
Setup
5. After a background image is chosen, select “ Load Still ”.
6. Enter the “
Keyer
” option to configure Chromakey.
7. Set Key Source to Input 3 and Fill to reference to Still.
8. Select “ CK Auto ” to trigger auto chromakeying, which automatically sets the chromakey settings to a
basis point and then manually fine tune “ K Lift ” or “ K Gain ” to adjust the chromakeying effect.
Start Keyer Chroma Self Priority Top
Keyer Keyer Ctrl Lift 0 Gain 1.0 Opac 100
P-in-P Key Source Input 1 Fill Black
P-in-P Keyer
DSK
CK Setup CK Auto Hue
110.0
Luma
80
Stills K Acc 160 K Lift 10 K Gain 5.0
User Mems Hi-Light 0 Lo-Light 0 Bg-Supp OFF
Inputs
Outputs Mask Left 0.0 Right 0.0
Setup Top 0.0 Bot 0.0
9. Finally enter the “P-in-P” option and set P-in-P source to Input 4.
10. Confirm the P-in-P location by adjusting the X and Y values first and then modify its size.
Start
P-in-P Keyer Black