Data Video PTC-150TL, Инструкция по эксплуатации

Страница: 52 / 57

52
11. Firmware Update
1) Copy three image files, p150mcpu.bin, P150FPGA.bin and p150mctl.bin, into the root
directory of a USB hard drive (<16 GB) and insert it into the USB port of PTC-150 (You may
also use USB extension cord).
2) Open the operation menu of IR remote controller (select from CAM 1-4; default is CAM1)
3) Main Menu
=> 5: SYSYEM
=> 4: UPDATE SOFTWARE
=> 5: UPDATE ALL
=>YES
=> ENTER
4) Wait for another five minutes until the following lines appear on the screen
-
Updated Mot-BD=>OK.
- Updated FPGA =>OK.
- Updated MCPU =>OK
The OSD will flash “Write OK/Power ON Again” alternately; it takes approximately 5 -7
minutes to complete the update.
5) Turn off the device by unplugging the power cord and plug the power cord back into the
socket to turn on the device again.
6) FW Update is complete.