Data-Tronix DT-HDVD-IPSTR-CB Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 47

Data-Tronix DT-HDVD-IPSTR-CB Скачать руководство пользователя страница 27

25

Configuring the IP Settings of TX/RX

You can configure the IP settings of TX/RX by selecting the device to be

configured from the list displayed and configuring options as below.

Note:



After changing the IP settings of TX/RX, you need to reboot them for

the settings to take effect as well as to ensure that they remain on

the same subnet as other TX/RX and DT-HDVD-IPSTR-CB.

Otherwise, communication failure may occur.



If you have forgotten your new IP settings, you can perform a

factory reset on TX/RX to use their default settings.

GUI Element

Description

Reload

Click this to make TX/RX appear below or refresh the
device
list.

If the device list is empty, it means no device is online.

Auto IP

Obtains IP address automatically.

Note:

The default AutoIP setting is recommended for
TX&RX communication. In this case, TX&RX use
AutoIP protocol and automatically obtain an IP
address in the 169.254.x.x range with a subnet
mask of 255.255.0.0 to use Bonjour to discover
each other.

DHCP

IP address assigned by DHCP server.

Static

IP address manually configured.

IP Address

IP address of TX/RX,

which can be set only when the

Static mode is selected.

Subnet Mask

Subnet mask of TX/RX,

which can be set only when the

Static mode is selected.

«
...
25
26
27
28
29
...
»

Содержание DT-HDVD-IPSTR-CB
















































Отзывы:

Нет отзывов