Data-Tronix DT-HDVD-IPSTR-CB Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 47

Data-Tronix DT-HDVD-IPSTR-CB Скачать руководство пользователя страница 15

13

Accessing the Device

You can use Web, Telnet or a third party controller to access the device to

configure, manage and control DT-HDVD-IPSTR-CB, encoders and

decoders via Web GUI or API commands.

Before Accessing the Device

Using LAN2 (C) Port

Before accessing the device, make sure that your computer and

LAN2 (C)

port are on the same subnet. The default IP parameters of this RJ45 port are

IP address 192.168.11.243 and subnet mask 255.255.0.0. Therefore, set

your computer in the 192.168.x.x range with a subnet mask of 255.255.0.0.

To do so, you can configure a static IP on your computer. This section takes

Windows 7 as an example.

Note:

If LAN2 (C) port's IP settings have been changed using the
administrator account, make sure that your computer's IP settings are
changed accordingly. Otherwise, you may not access the device.

1. Click

Start

menu.

2. Choose

Control Panel

>

Network and Internet

>

Network and Sharing

Center

>

Change Adapter Settings

, right click

Local Area Connection

and choose

Properties

.

«
...
13
14
15
16
17
...
»

Содержание DT-HDVD-IPSTR-CB
















































Отзывы:

Нет отзывов