Data Translation DT9816 Series Скачать руководство пользователя | Manualshive

Страница: 16 / 108

background image

Chapter 1

16

Supported Software

The following software is available for use with the DT9816 Series module, and is provided on
the OMNI CD:

•

Device Driver

– The DT9816 Device Driver allows you to use a DT9816 Series module

with any of the supported software packages or utilities. Refer to

for more

information on configuring the device driver.

•

Quick DataAcq application

–

The Quick DataAcq application provides a quick way to get

up and running using a DT9816 Series module. Using this application, you can verify key
features of the module, display data on the screen, and save data to disk. Refer to

for more information on using the Quick DataAcq application.

•

QuickDAQ Base Version

– The base version of QuickDAQ is free-of-charge and allows

you to acquire and analyze data from all Data Translation USB and Ethernet devices,
except the DT9841 Series, DT9817, DT9835, and DT9853/54. Using the base version of
QuickDAQ, you can perform the following functions:

−

Discover and select your devices.

−

Configure all input channel settings for the attached sensors.

−

Load/save multiple hardware configurations.

−

Generate output stimuli (fixed waveforms, swept sine waves, or noise signals).

−

On each supported data acquisition device, acquire data from all channels supported
in the input channel list.

−

Choose to acquire data continuously or for a specified duration.

−

Choose software or triggered acquisition.

−

Log acquired data to disk in an .hpf file.

−

Display acquired data during acquisition in either a digital display using the Channel
Display window or as a waveform in the Channel Plot window.

−

Choose linear or logarithmic scaling for the horizontal and vertical axes.

−

View statistics about the acquired data, including the minimum, maximum, delta, and
mean values and the standard deviation in the Statistics window.

−

Export time data to a .csv or .txt file; you can open the recorded data in Microsoft
Excel® for further analysis.

−

Read a previously recorded .hpf data file.

−

Customize many aspects of the acquisition, display, and recording functions to suit
your needs, including the acquisition duration, sampling frequency, trigger settings,
filter type, and temperature units to use.

•

QuickDAQ FFT Analysis Option

– When enabled with a purchased license key, the

QuickDAQ FFT Analysis option includes all the features of the QuickDAQ Base version
plus basic FFT analysis features, including the following:

−

The ability to switch between the Data Logger time-based interface and the FFT
Analyzer block/average-based interface.

«
...
14
15
16
17
18
...
»

Содержание DT9816 Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для DT9816 Series

Бренд: easydriver Страницы: 26

Бренд: Calsense Страницы: 10

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 8

Бренд: Harman Kardon Страницы: 25

Бренд: Uniss Страницы: 21

Бренд: Oceanic Страницы: 11

Бренд: Watts Страницы: 4

Бренд: WaterCop Страницы: 4

FSDrive-MV1000 Series

Бренд: YASKAWA Страницы: 260

Бренд: YASKAWA Страницы: 114

Бренд: YASKAWA Страницы: 20

Бренд: YASKAWA Страницы: 152

Бренд: YASKAWA Страницы: 66

Бренд: YASKAWA Страницы: 20

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

J1000 CIMR-JC series

Бренд: YASKAWA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды