Data Translation DT340, Руководство по началу работы

Страница: 25 / 70

Installing a DT340 Board and Loading the Device Driver
17
3
3
3
3
3
3
3
3
3
Configuring the DT340 Board
The DT340 board has eight resistor locations that correspond to the
eight clock input signals on the board.
Figure 2 shows the location of
the resistors on the DT340 board.
Figure 2: User-Resistor Locations on the DT340 Board
Table 2 lists the clock input signals and the resistors to which they
correspond.
Table 2: Clock Input Signals and Resistor Use
Clock Input Signal Resistor
Clock Input 0 R1
Clock Input 1 R2
Clock Input 2 R3
Clock Input 3 R4
Clock Input 4 R5
DT340 Board
C/T 0
C/T 3
C/T 4
C/T 7