Data Translation DT330 Series, Руководство по началу работы

Страница: 25 / 60

Installing the Board and Loading the Device Driver
17
3
3
3
3
3
3
3
3
3
Inserting the DT330 Series Board into the
Computer
Once you have set up an expansion slot, perform the following steps
to insert the DT330 Series board into the computer:
1. Discharge any static electricity by holding the wrapped board in
one hand while placing your other hand firmly on a metal
portion of the computer chassis.
2. Carefully remove the antistatic packing material from the board.
(It is recommended that you save the original packing material in
the unlikely event that your board requires servicing in the
future.)
3. Hold the board by its edges and do not touch any of the
components on the board.
4. Position the board so that the cable connectors are facing the rear
of the computer, as shown in
Figure 2 .
Figure 2: Inserting the DT330 Series Board in the Computer
Rear of Computer
DT330 Series
Board
PCI Expansion Slot Bus Connector