Data Translation DT3153, Руководство пользователя

Страница: 116 / 140

Appendix C
100
5. Uncheck all checkboxes, then click Next .
6. Click Disable the device , then click Finish .
7. Open the Control Panel .
8. Double-click Sounds and Multimedia .
9. Click the Hardware tab.
10. Click DT3153 MACH Series Frame Grabber , then click
Properties .
11. Click the Properties tab.
12. Double-click Multimedia Drivers .
13. Click DT3153 MACH Series Frame Grabber , then click
Properties .
14. Click Settings .
15. Click Add New .
16. Enter a name for the device, then click Add .
17. Select Enable Board to activate the board. If you want to retain
the settings but disable the board (and therefore not use the
memory), remove the checkmark next to Enable Board.
18. For Video Format , indicate the video format of your video input
source: 50 or 60 Hz.
19. For Desired Memory Size , select the amount of contiguous
memory (in MB) that you want to allocate in your system to hold
the acquired frames. A 60 Hz, 640-by-480 image requires 1.2 MB
per frame; a 50 Hz, 768-by-576 image requires 1.7 MB per frame.
The actual amount of memory that the device driver can allocate
depends on your system resources. It is recommended that you
select only as much memory as you need to leave memory for
other devices. Once you enter the desired memory size, the
device driver allocates as much memory as possible to match the
value you entered; the actual memory size allocated is shown in
the
Actual Memory Size text box when you restart your system.