Data Translation DT3130 Series, Руководство пользователя

Страница: 139 / 160

Modifying the Device Driver
123
C
C
C
C
C
C
C
C
C
Windows 2000 Procedures
This section describes the following procedures in Windows 2000:
• Adding a board to the device driver configuration (on this page);
• Modifying the board settings in the device driver configuration
(on page 124 ); and
• Uninstalling the device driver, if necessary (on page 125 ).
Adding a Board to the Device Driver Configuration
To add a new board to the DT3130 Series Device Driver
configuration, perform the following steps:
1. Turn your computer off and insert the new DT3130 Series board
into your computer following the instructions in the
DT3130
Series Getting Starting Manual.
2. Turn your computer on and start Windows 2000.
The Add New Hardware Wizard dialog box appears.
3. Click Next .
4. Click Search for a suitable driver for my device (recommended) ,
make sure all optional search locations are unchecked, then click
Next .
5. Click Next .
The files are copied .
6. Click Finish .
7. Open the Control Panel.
8. Double-click the DT Imaging Control icon.