Data Translation DT3010 Series, Руководство по началу работы

Страница: 29 / 142

Installing the Board and Loading the Device Driver
19
3
3
3
3
3
3
3
3
3
Inserting the DT3010 Series Board into the
Computer
Once you have set up the expansion slots and connected the EP324
cable to the board (if needed), perform the following steps to insert
the DT3010 Series board into the computer:
1. Position the board so that the cable connectors are facing the rear
of the computer.
Figure 3 shows an example of inserting a
DT3010, DT3010/32, DT3010/32-268, or DT3016 board. Figure 4
shows an example of inserting a DT3010-268 board.
Figure 3: Inserting the DT3010 Series Board in the Computer
Rear of Computer
DT3010, DT3010/32,
DT3010/32-268 or
DT3016
PCI Expansion Slot Bus Connector