manualshive.com logo in svg

Data Translation DT3000 Series, Руководство пользователя, Страница: 13 / 156

Поделиться
Скачать
Data Translation DT3000 Series Скачать руководство пользователя страница 13

About this Manual

12

•

Chapter 3

, 

“Attaching and Configuring a Screw Terminal Panel/ Backplane,” 

describes 

how to attach a DT730 or DT730-T screw terminal panel to a DT3000 Series board, how to 
attach 5B or 7B Series conditioning backplanes, and how to configure these accessories for 
use with a DT3000 Series board.

•

Chapter 4

, 

“Wiring Signals,” 

describes how to wire signals to a DT3000 Series board using 

the DT730 screw terminal panel.

•

Chapter 5

, 

“Verifying the Operation of a DT3000 Series Board,” 

describes how to verify 

the operation of a DT3000 Series board with the Quick DataAcq application

•

Chapter 6

, 

“Principles of Operation,” 

describes all of the features of the boards and how to 

use them in your application.

•

Chapter 7

, 

“Supported Device Driver Capabilities,” 

lists the data acquisition subsystems 

and the associated features accessible using the DT3000 Series Device Driver.

•

Chapter 8

, 

“Calibration,” 

provides information that allows you to calibrate the analog I/O 

circuitry of the boards and to calibrate the DT730-T screw terminal panel.

•

Chapter 9

, 

“Troubleshooting,” 

provides information that you can use to resolve problems 

with the boards and the device driver, should they occur.

•

Appendix A

, 

“Specifications,” 

lists the specifications of the boards.

•

Appendix B

, 

“Connector Pin Assignments,” 

shows the pin assignments for the connectors 

on the boards and for the DT730 and DT730-T screw terminal panel.

•

Appendix C

, 

“Using Your Own Screw Terminal Panel,” 

describes additional 

considerations to keep in mind when designing your own screw terminal panel for use 
with a DT3000 Series board. 

• An index completes this manual.

Conventions Used in this Manual 

The following conventions are used in this manual:

• Notes provide useful information or information that requires special emphasis, cautions 

provide information to help you avoid losing data or damaging your equipment, and 
warnings provide information to help you avoid catastrophic damage to yourself or your 
equipment.

• Items that you select or type are shown in 

bold

.

Related Information 

Refer to the following documents for more information on using the DT3000 Series board:

•

Measure Foundry Manual 

(UM-19298) and online help. These documents describe how to 

use Measure Foundry™ to build drag-and-drop test and measurement applications for 
Data Translation® data acquisition devices.

• DT-Open Layers for .NET User’s Manual (UM-22161). For programmers who are 

developing their own application programs using Visual C# or Visual Basic .NET, this 
manual describes how to use the DT-Open Layers for .NET Class Library to access the 
capabilities of Data Translation data acquisition devices. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DT3000 Series





























































































































































Отзывы:

Нет отзывов