background image

NSM ES-IV Jukebox Installation 

Hooking Up The Digital Music Player To Your Jukebox

 

 

Assemble your Hard Disc Drive or Compact Flash memory 
to the MP3-DSP digital music player board. 
 
Plug in the 9-pin mini DIN connector (arrow or notch at the 
top). Connect the power supply and D-Sub connectors as 
shown at the left. 
 
At the jukebox Control Unit board connector position ST8, 
unplug the 8-pin CD Mechanism connector and plug in the 
NSM4MP3's connector (blue wire facing toward ST5). 
 
Unplug the connectors at the back of the CD mechanism 
changer, attach the 4-pin jukebox audio connector to the 
Ground Loop Isolator, plug the players RCA audio output 
connectors to the other end of the isolator. 
 
The wall adapter plugs into the jukebox internal outlet.  
 
 

Built-In Diagnostics 

 

When the player is powered up, diagnostics are performed 
followed by song indexing. The LED will be blinking rapidly 
during this time. Depending upon the number of songs,  
this can take up to a few seconds to complete. The LED 
will stop blinking when finished. 
 
If an error is detected, the LED will continually flash an 
error code of one to four blinks each, 
 
(1) INITIALIZATION ERROR, disk drive is not inserted 
                 correctly or MP3 player board failure. 
(2) FILESYSTEM ERROR, unable to locate FAT32 
                 filesystem or drive was not formatted. 
(3) NO FOLDERS FOUND, a directory folder is used for 
                 each CD, check disk contents. 
(4) NO MP3 FILES FOUND, MP3 files are used for each 
                 audio track, check disk contents. 
 
 

Playing MP3 Songs

 

 

Your jukebox operates exactly as it did before, two digit 
disc number and two digit track number. 
 
The jukebox and player are also capable of having up to 99 
tracks for each disc but you may need to set parameter 
P22 to play tracks higher than 24. The first two digits are 
the maximum disc number and the next two are maximum 
track number. Factory setting is 0024 which is 100 discs 
having up to 24 tracks. 
 
NSM ES-IV series jukeboxes do not employ track select 
verification. In other words, you can select a track number 
that does not exist. In this case, the jukebox will revert to 
play track number 1 on that selected CD. 

POWER SUPPLY 

AUDIO OUTPUT 

MP3 PLAYER

 

TO JUKEBOX  

CONTROL  

TO 

JUKEBOX 

AUDIO 

FROM 

MP3 

PLAYER  

9-PIN 

D-SUB 

37-PIN 

D-SUB 

Ground 

Loop 

Isolator 

Содержание NSM4MP3







Отзывы: