The hard disk drive has two sets of connector pins.
43-pins on the left side and 4-pins on the right.
Position the disk drive onto the circuit board then align
the left side pins with the 44-pin IDE connector.
Slide the disk drive forward into the connector. The 4-pins
on the right are not used.
This is the MP3 digital subsystem
player circuit board with a hard disk
drive attached.
The Hard Drive is not included !
This is the Compact Flash
Memory card version. It requires
the "IDE to CF" adapter board
which plugs into the 44-pin IDE
connector.
The "IDE to CF" adapter board is
available as a separate item.
The Hard Drive or Compact Flash
Memory cards are also available.
Assembling the Hard Disk Drive or Compact Flash Memory Card
The MP3-DSP music player system
