Data Modul AG AIMB-258 страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 84

background image

41

AIMB-258 User Manual

Chapter 2

B

IOS Operation

!

Power Management [User Defined]

This item allows user to select system power saving mode.

!

Video Off Method [DPMS]

This item allows user to determine the manner is which the monitor is blanked.

!

Video Off In Suspend [Yes]

This item allows user to turn off Video when the system enters suspend mode.

!

Suspend Type [Stop Grant]

This item allows user to determine the suspend type.

!

Modem use IRQ [3]

This item allows user to determine the IRQ which the MODEM can use.

!

Suspend Mode [Disabled]

Shows the time of system inactivity before all devices except the CPU will be
shut off.

!

HDD Power Down Mode [Disabled]

This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.

!

Soft-Off by PWR-BTTN [Instant-Off]

This item allows user to define function of power button.

!

PWRON After PWR-Fail [ON/Off/Former-Sts]

Use this to set up the system after power failure. The “Off” setting keeps the sys-
tem powered off after power failure, the “On” setting boots up the system after
failure, and the “Former-Sts” returns the system to the status before power fail-
ure.

!

PowerOn by LAN [Enabled]

This item allows users to power on the system via LAN. The choices are
“Enabled” and “Disabled”.

!

PowerOn by Modem [Enabled]

This item allows users to power on the system by Modem. The choices are
“Enabled” and “Disabled”.

!

USB KB Wake_Up From S3 [Disabled]

This item allows user to set USB keyboard wake up system from S3 Enable or
Disable.

!

PowerOn by Alarm [Disabled]

The choices are “Enabled” and “Disabled”. If enabled, the fields that follow indi-
cate dates and times of alarm settings.

Min Saving

Minimum power management. Suspend Mode=1 hr.

Max Saving

Maximum power management. Suspend Mode=1 min.

User Define

Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.

V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-

chronization ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS

Initial display power management signaling.

Instant-Off

Press power button then Power off instantly.

Delay 4 Sec

Press power button 4 sec. to Power off.

«
...
47
48
49
50
51
...
»

Содержание AIMB-258





















































































Отзывы:

Нет отзывов

Похожие инструкции для AIMB-258

Бренд: Advantech Страницы: 3

B550M AORUS PRO-P

Бренд: Gigabyte Страницы: 44

Бренд: VIA Technologies Страницы: 14

Бренд: JETWAY Страницы: 44

Бренд: Global American Страницы: 37

Бренд: Gigabyte Страницы: 93

Бренд: California Eastern Laboratories Страницы: 34

Бренд: ECS Страницы: 60

Бренд: MSI Страницы: 92

Бренд: Exar Страницы: 9

Бренд: ECS Страницы: 70

Бренд: DFI Страницы: 134

Worcester TDS 300

Бренд: Bosch Страницы: 84

Бренд: Bosch Страницы: 4

Бренд: Suzuki Marine Страницы: 63

Бренд: Suzuki Страницы: 68

Бренд: Caen RFID Страницы: 29

Бренд: Maxim Integrated Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды