Installing the Drive
3
014–001953
CAUTION: Handle your drive or mass storage subsystem gently; do not drop
or jar it. Make sure you have a firm grip on it before you lift it,
and lift it with both hands.
4.
Make sure that the model and part numbers on the packing slip match those
on your drive and cables. If you think you received the wrong drive or cables,
contact Data General as described in the “Telephone Assistance” section in the
front of this document.
5.
Make sure that you have all necessary mounting brackets for the computer or
mass–storage subsystem in which you intend to install the drive. Refer to the
expanding or maintaining manual that came with your computer or
mass–storage subsystem. It contains information that you will need to install
the drive.
The drive has several features that you may need to select using jumpers. The next
section explains how to install or remove these jumpers.
Installing or Removing the Cartridge Tape
Drive’s Jumpers
This section explains how to select the SCSI ID number and other drive features by
installing or removing jumpers. Figure 1 shows the location and name of the five
jumpers on the cartridge tape drive. You may need to install or remove some of
these jumpers. Read the next sections to find out.
Содержание 6675
Страница 4: ......
