Data General 6662, Клиентская документация

Страница: 17 / 24

Installing the Drive
11
014–002139
Removing the terminating resistor pack
Notch
or key
Installing the terminating resistor pack
Socket
Figure 5 Removing or Installing a Terminating Resistor Pack
Configuring the Model 6799 Drive
This section explains howto set the drive board's jumpers. Figure 6 shows the
location of the jumpers on the Model 6799 drive board.
CNH7
jumpers
CNH1
jumpers
CNH2
jumpers
1
2
21
22
10
2
9
1
CNH3
jumpers
1
2
3
4
1
2
= jumper installed (in)
KEY:
Model 6799 (520-Mbyte) Drive
118–11414
Figure 6 Setting the Drive Jumpers for Model 6799
Setting the Jumpers on the Model 6799 Drive
Table 4 shows settings for the jumpers on the Model 6799 drive. The boxes in this
table indicate factory default settings for these jumpers. The table also describes the
function of each jumper. To find out whether you will need to change these settings,
read the next sections on the jumpers.