dCS
Pronto User Manual
Software Issue 2.1x
Data Conversion Systems Ltd.
April 2010
Manual filename: dCS Pronto Manual v2_1x.doc
Page 7
English version
Controlling a
dCS Scarlatti
DAC
Press the silver button by the
DAC
label to jump to DAC page 1.
DAC Page 1 – Inputs
Press a button to select an input.
•
Input+
– Selects the next input in the sequence.
•
1394-0
, selects source 0 on the 1394 interface,
1394-1
selects source
1,
1394-2
selects source 2. If more sources are connected, use the
Input+
button to select them.
In a typical 4-box system,
1394-0
is the Transport channel (e.g. STT)
while
1394-1
is the Upsampler channel (e.g. SUP).
The
Paganini
and
Debussy
DACs respond similarly, but have fewer inputs.
The
Puccini
Player responds to the
Input+
button only.
DAC Page 2 – Options
•
The
3
Sync Source Setting
buttons (
WClk
*
,
Audio
and
Master
) set
the sync source for the current input. The DAC stores this setting
separately for each input. Note that the Word Clock connections
must
be wired correctly for Master mode operation or to sync to Word Clock
(see the DAC manual).
•
The
Filter
button changes the DAC filter setting. See the DAC manual
for information on filters.
•
Press
the
Balance
button to use the
Volume
control on the left side of
the handset to adjust the
Balance
. Press again to change back.
•
Press
the
Phase
button to change the phase of all the DAC’s
analogue outputs. Press again to return to normal phase.
•
The
Display On/Off
button turns the main display on and off.
•
Press
the
Wake/Sleep
button at the end of a listening session to mute
the DAC outputs, close the menu if it is open and turn the display off.
Press the
Wake/Sleep
button again to return to normal operation.
The
Paganini
DAC responds similarly.
The
Puccini
Player responds to the
Filter
,
Balance,
Phase, Display
On/Off
and
Wake/Sleep
buttons only.
The
Debussy
DAC responds to the
Filter
,
Phase,
and
Wake/Sleep
buttons
only.
!
* The remote command for setting the Sync Source to
WClk
was added in
Scarlatti DAC
software v1.10, the button will not function if earlier software is loaded.
