dCS Puccini U-Clock
User Manual
Software Issue 1.0x
October 2008
Filename: Puccini U-Clock Manual v1_0x.doc
Page 5
English version
Mains Regenerators
We do not recommend the use of mains regenerators. However, if you do wish to use a mains
regenerator with variable voltage and frequency, we recommend that you set the voltage to match
your local voltage and the frequency to either 50Hz or 60Hz ONLY.
!
Damage caused to your
Puccini U-Clock
by misuse of a mains regenerator or by a
malfunctioning mains regenerator is not covered by the warranty.
Positioning the unit
Place the unit on a firm, vibration free base, allowing convenient connection to the other parts of your
system. To prevent overheating, we recommend that you leave some free space around the unit to
allow for ventilation.
3 feet are fitted as standard, this may be changed to the 4-foot arrangement shown below, if you
prefer. Spare feet are available as an optional extra. The mounting points are M4 size, maximum
screw depth is 10mm.
FRONT EDGE
BACK EDGE
MOUNTING POINT
FOR 4 FOOT
ARRANGEMENT
MOUNTING POINT
FOR 4 FOOT
ARRANGEMENT
FRONT EDGE
BACK EDGE
MOUNTING POINT
FOR 3 FOOT
ARRANGEMENT
STANDARD 3-FOOT
ARRANGEMENT
OPTIONAL 4-FOOT
ARRANGEMENT
Figure 1 – 3-foot and optional 4-foot arrangements
Disposal at end-of-life
The symbol indicates that this product should not be treated as normal household
waste. It should be recycled, so please take it to an approved collection facility.
