Data Conversion Systems dCS Puccini U-Clock, Руководство пользователя

Страница: 11 / 15

dCS Puccini U-Clock User Manual Software Issue 1.0x
October 2008
Filename: Puccini U-Clock Manual v1_0x.doc
Page 11
English version
R
EAR
P
ANEL
Figure 5 – Rear panel
Mains Inlet
Power is connected via a standard IEC320 connector (E) which incorporates a fuse, it is isolated by a
2-pole power switch (D).
Word Clock Out puts
The four Word Clock Out connectors (F) all carry identical TTL-level word clock at either 44.1 or
48kHz. You can use all four outputs at the same time if you wish.
Word clock is used for synchronisation only, it does not carry digital data.
SPDIF Outputs
2 SPDIF outputs are provided, RCA1 and RCA2 , on RCA phono connectors (G). Each outputs the
same SPDIF data at the same sample rate that is present on the USB interface, if it is active. You can
use both outputs at the same time if you wish.
USB Input
The USB interface on a ‘B’ type connector (H) accepts uncompressed PCM data up to 24 bits,
sampled at 32, 44.1, 48, 88.2 or 96kS/s from a Windows™ PC, Apple Mac™ or sound server
equipped with a USB 1.1 interface or later.
!
We have tested this interface with several common formats running on Windows™ Vista,
Windows™ XP and Apple Mac™ OSX but we cannot accept responsibility for correct
operation with all source devices, operating systems or software.