Installation
10
User’s Manual - DSP19.2 Fast Poll Modem
Hardware Overview
Front View
Figure 2-1 shows the front view of the DSP19.2 stand-alone modem. Starting from the left
side, this view shows:
y
A set of eight LEDs for modem interface status (see Table 2-6 on page 23)
y
A loopback control push-button switch (see Loopback Control Switch on page 23)
Figure 2-1. Front View of the DSP19.2 Modem
Back View
Figure 2-2 shows the back view of the DSP19.2 stand-alone modem. Starting from the left
side, this view shows:
y
A 4-wire/2-wire configuration block labeled
LEASED LINE
y
An RJ-11 modular jack labeled
RS-485
for connecting the modem to an RS-485
RTU
y
A female, 9-pin RS-232 connector labeled
RS-232
for connecting the modem to a
standard DTE (RTU)
y
A power connector labeled
10-48V DC
Figure 2-2. Back View of DSP19.2 Modem
