20
A setpoint change confirm window will appear, click “OK” to confirm the change.
The new setpoint or deadband will show on the system status screen.
H. System On/Off Control
Important Note:
The system ON is the default setting, to turn the system OFF, the web
browser must be always active during the OFF mode control period and communicate with
the idap card. In other words, idap web page must be active otherwise the system will revert
to ON mode if the web page interface is inactive.
To turn the system OFF, simply click “Change” button next to the system ON box, select OFF then
click “Submit”\,” the following warning window will appear:
Click OK, the system will turn OFF and the system ON/OFF status box will show OFF message in
red background.
