DASHCLEAN G12, Руководство по эксплуатации

Страница: 10 / 40

page- 10
Operating Manual G12/G18/G22/G32
2020 rev. 4.0
10. Grounding instructions
The dust extractor must be grounded. If a dust extractor malfunctions or
breakdowns, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. The dust extractor is equipped with a cord having
an equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
11. Service

When cleaning and servicing the machine, you must switch off the machine and
remove the plug from the outlet.

Don’t clean the machine with a high pressure cleaner. If necessary, do not
direct at the openings on the machine, especially the opening for cooling air.

Before moving the machine from the work area, the machine must be cleaned.

Proper personnel protective equipment must be used while replacing the main
filter or the HEPA filter. If possible, use a special suitable room.
 All parts which are contaminated after service must be properly disposed of in
plastic bags according to all regulations.

If the machine has to be used for other purposes, it is extremely important that
the machine is cleaned, to avoid the spread of hazardous dust.

Do not puncture the HEPA filter. Risk of dust dispersion.
12. Operating Instructions
1) Vacuuming process
Before starting a vacuuming process,

make sure the machine is properly connected to a grinder or a floor tool via
the provided hose and fittings.

chek the power cable and the plugs are in a good condition.

make sure the power voltage corresponds to that on the rating plate and
connect correctly the power plug to a power socket
Turn on the power switch to start a vacuuming process.
During the vacuuming process, dust-laden air is sucked through the flexible hose
and inlet valve at a high speed. The air is then slowed down by the cyclone, and
coarse dust particles are separated out partly by centrifugal force and partly by
gravity. Air and finer particles pass through the main filter at the first and the
HEPA filter at the final stage where separation is made.