Dash Chef DPB300, Руководство пользователя

Страница: 6 / 21

Blender Settings Guide ∙ 11 10 ∙ Blender Settings Guide
ON/OFF & PULSE BUTTON
Ensure that the Control Dial is in the standby position (the Position Indicator should
be pointed towards the Power Indicator Light).
When the blender is first plugged in and Pitcher is placed on the Motor Base, the
Power Indicator Light will begin blinking.
To pulse, you can press and hold the “Pulse” button.
BLENDING TIP
When blending thick or sticky foods, start blending at a low setting. If the blades are jammed, use the Tamper to
incorporate the food in the Pitcher, allowing for captured air to escape. Close the Lid tightly and begin to blend again.
If the blades are still jammed, disconnect the appliance and stir the ingredients in the Pitcher using a spoon or spatula,
pressing the ingredients toward the blades. Then close the Lid and press “On/Off” to continue blending.
PRESET FUNCTIONS
To use a preset function, turn the Control Dial counter clockwise to any of the preset
functions on the left of the Power Indicator Light.
Press “On/Off” to begin blending.
The blender will automatically turn off once the cycle is finished.
To end the cycle early, simply press the “On/Off” button again.
Make sure to turn the Control Dial to the standby position with the Position Indicator
pointed towards the Power Indicator Light when you are done blending.
SOUP
This setting is for preparing a wide variety of soups. The
blending time is approximately 8 minutes. This setting heats
your ingredients while blending, resulting in piping-hot,
ready-to-serve soups!
SMOOTHIE
This setting is for making smoothies, shakes, mixed drinks,
juices, and frozen drinks. The blending time is approximately
50 seconds.
FROZEN
This setting is for making frozen treats such as ice cream, snow
cones, or Italian ices. The blending time is approximately
1 minute. Use the Tamper to combine ingredients when
blending using this setting.
BLENDER SETTINGS GUIDE
MANUAL SETTINGS
Once the Pitcher is in place and the Power Indicator Light is blinking, turn the Control
Dial to your desired blending level.
The appliance will automatically begin blending.
To turn off, either turn the Control Dial back to the standby position, or press the “On/
Off” button.
Make sure to turn the Control Dial back to the standby position with the Position
Indicator pointed towards the Power Indicator Light when you are done blending.
The blender will stop automatically after 10 minutes to prevent overheating.