manualshive.com logo in svg

Dascom Tally 1325, Руководство пользователя

Поделиться
Скачать
Dascom Tally 1325 Скачать руководство пользователя страница 50

Tally Dascom 1325 
 
 

36 

 

6 Maintenance 

Your printer requires very little care. Occasional cleaning and replacement of the ribbon cartridge are all that is 
required. Cleaning is recommended approximately every 6 months or 300 hours of operation, whichever is 
sooner. Lubrication of the printer is not usually necessary. If the print head carriage does not move smoothly 
back and forth, clean the printer in the manner described in this chapter. If the problem continues, contact your 
dealer to determine whether lubrication may be necessary. 
 
 

 

Switch printer off and unplug the power cord from   
the mains before doing any maintenance work. 

 
Cleaning 

The housing and the top cover of the printer help protect it against dust, dirt, and other contaminants. However, 
paper produces small particles that accumulate inside the printer. This section explains how to clean and 
vacuum the printer and how to clean the paper bail rollers. It is easier to clean the printer when the cover is 
open. 
 

Cleaning and Vacuuming the Printer 

If the print head carriage does not move smoothly back and forth or paper particles have accumulated in the 
printer, clean the printer. 
 
To clean and vacuum the printer: 

1. 

Remove any paper from the printer. 

Make sure that the power is off, and then disconnect the printer power 

cord. 

2.  Using a soft vacuum brush, vacuum the exterior of the printer. Also vacuum the cut sheet edge. 
3.  Use a soft, damp cloth to wipe the exterior of the printer, including the cover. A mild detergent may be used. 

Do not use solvents, kerosene, or abrasive cleaning materials that may damage the printer

. 

4.  Open the cover of the printer and remove the ribbon cartridge. Using a soft vacuum brush, gently vacuum 

the platen, the print head carriage and shaft, and surrounding areas. You can easily slide the print head to 
the left or right when the power is off. Be careful not to press too hard on the flat head cable that extends 
from the print head carriage. 

5.  Re-install the ribbon cartridge. 
6.  Remove the single sheet feeder and clean the form tractors and the surrounding areas. 
7.  Re-install the single sheet feeder. 
 

Cleaning the Paper Rollers 

Clean the platen and paper bail rollers occasionally or when stains or smudges appear on the paper. Use a 
mild detergent as appropriate. 

Do not use alcohol to clean the platen or the rollers. Alcohol may cause the 

rubber to harden.

 

 
To clean the rollers and the platen: 
1.  Apply a small amount of water to a soft cloth. Avoid spilling liquid inside the printer. 
2.  Place the cloth against the platen and manually rotate the paper feed knob. 
3.  Repeat this procedure for each roller. 

Содержание Tally 1325





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды