User Manual
UMN:CLI
V5824G
81
NO
TYPE PVID COS
STATUS
MODE
FLOWCTRL
INSTALLED
(ADMIN/OPER) (ADMIN/OPER)
------------------------------------------------------------------------
5 GPON 1 0 Down/Down Auto/Full/2500 Off/ Off Y
SWITCH(bridge)#
5.2.2
Auto-Negotiation
Auto-negotiation is a mechanism that takes control of the cable when a connection is
established to a network device. Auto-negotiation detects the various modes that exist in
the network device on the other end of the wire and advertises it own abilities to
automatically configure the highest performance mode of interoperation. As a standard
technology, this allows simple, automatic connection of devices that support a variety of
modes from a variety of manufacturers.
To enable/disable the auto-negotiation on an Ethernet port, use the following command.
Command
Mode
Description
port nego
PORTS
{
on
|
off
}
Bridge
Enables/disables the auto-negotiation on a specified
port, enter a port number. (default: on)
PORTS: port number
You cannot enable this function on 1000Base-X optical interface.
5.2.3
Transmit Rate
To set the transmit rate of an Ethernet port, use the following command.
Command
Mode
Description
port speed
PORTS
{
10
|
100
|
1000
|
10000
}
Bridge
Sets the transmit rate of a specified port to
10/100/1000 Mbps or 10Gbps.
PORTS: port number
You cannot set transmit rate on 1000Base-X optical interface.
!
!
Содержание V5824G
Страница 1: ...V5824G GPON OLT system User Manual...