Dasan V5824G, Руководство пользователя, Страница: 477 / 629

User Manual UMN:CLI
V5824G
477
To display the user configuration of the OLT anti-spoofing, use the following command.
Command Mode Description
show olt anti-spoofing [ OLT-ID ] GPON
Shows the user configuration of the OLT anti-spoofing.
show olt anti-spoofing GPON-OLT
To display the current OLT anti-spoofing status, use the following command.
Command Mode Description
show olt anti-spoofing status GPON-OLT
Shows the current anti-spoofing MAC filtering status
per ONU, MAC and VID.
11.1.12 ONU RX-Power Update
To configure the interval of ONU rx-power update, use the following command.
Command Mode Description
onu rx-power update {<1-1440> |
disable }
GPON
Configures the interval of ONU rx-power update.
1-1440: interval (unit: minute)
disable: do not update
To display the configuration of ONU rx-power update, use the following command.
Command Mode Description
show onu rx-power update
GPON
GPON-OLT
Shows the configuration of ONU rx-power update.
11.1.13 Configurations for RF Return Packet Forwarding
In case the ONUs are connected with the set-top-boxes supporting Ethernet return path
capabilities, GPON OLT can use Ethernet for the return path to head-end infrastructure.
Deploying an ONU/MDU with an RF to Ethernet converter enables RF-digital-RF
conversion. At the ONU, the upstream return path packet is carried in GPON OLT. The
GPON OLT aggregates the packets from the ONUs and sends them to the Ethernet to RF
converter as the head-end node. This RF converter converts the Ethernet signals to back
to RF signal.
To specify the destination MAC address, ethertype, and VLAN ID for the head-end node
on the connection to send RF return path traffic, use the following command.
Command Mode Description
onu rf-pw dst-mac MACADDR
GPON
Sets the destination MAC address of RF return path
modulator
’s FPGA.
onu rf-pw ethtype TYPE-NUM Sets the ethernet type and VLAN ID for RF return path
traffic forwarding.
TYPE-NUM: ethernet type (e.g. 0x8864 - PPPoE)
onu rf-pw vid <1-4094>