6
17. PITCH
- indicator light to show percent of pitch is
displayed.
18. TIME BAR –
shows either time remaining or elapsed
depending on the setting of the
TIME BUTTON (2)
.
pause at that point
2) Press the CUE button(16) during playback to return to
the position at which playback started(Back Cue)
6. Pausing
Press the PLAY/PAUSE button(18) to switch between
play and pause.
OPERATING INSTRUCTIONS
1.Opening and Closing
the Disc Tray and Loading Discs
a)Opening and closing the disc tray
This operation only works when the power is on.
Press the OPEN/CLOSE button(10) to open or close
the disc tray. OPEN/CLOSE button(10) are provided on
both the main unit and control unit or
Press PLAY button tray automatically closes.
If tray is not closed after 60 seconds it will close
automatically and pause.
The disc trays cannot be opened during playback to
prevent playback from being interrupted if the
OPEN/CLOSE button is pressed accidentally. Stop
playback, then press the OPEN/CLOSE button(10).
2. Loading discs
Hold the disc by the edges and place it in the disc tray.
Do not touch the single surface (the glossy side).
When using 12cm discs, place the disc in the outer tray
guides.
CAUTION:
Do not play foreign objects in the disc tray, and do not
place more than one disc in the disc tray at a time.
Doing so may result in malfunction.
Do not push the disc tray in manually when the power is
off, as this may result in malfunction and damage the
player.
3. Selecting Tracks
Select desired track using NUMBER Button(6) or press
the TRACK Buttons once to move to one higher or
lower track or Hold the TRACK buttons (14) in to change
tracks continuously at a higher speed.
When a new track is selected during playback, playback
begins as soon as the search operation is completed.
4. Starting Playback
Press the PLAY/PAUSE button(18) during the pause or
cue to start playback.
The PLAY indicator lights when playback starts.
5. Stopping Playback
There are two ways to stop playback.
1)Press the PLAY/PAUSE button(18) during playback to
7. Cueing
"Cueing" is the action of preparing for playback; when
the Cue button(16) is pressed, playback return to the
cue point and enters pause mode. When the
PLAY/PAUSE button(18) is pressed during the cue
mode, playback starts.
Cue point setting:
A. Playback starts from pause ( using the jog wheel to
set the starting point ) or skip to a new track during
play or pause.
The beginning play point will be set to the cue point.
Or
B. Press the IN REALTIME CUE button(13) during
playback to set the new cue point.
Or
C. Memorize any of 10 CUE points by pressing
MEMORY(1) to set desired Cue then press any of 10
number buttons(6).
To return to Cue point press Cue Button(16). This will
return to point A or B above.
The player has completed the cue or pause operation
and is waiting for the play start command.
When the PLAY/PAUSE button(18) is pressed,
playback starts.
D. To recall cues, if the recall LED is lit you can press
the last number button cue stored and create a
STUTTER EFFECT (see also p8). The last cue that
was stored or recalled will flash in the LED screen to
let you know it was last cued up.
8.Auto cue
When disk is loaded, the cue point is set to the first
source of music.
If track is changed before pressing play, the cue point is
changed to the new starting point.
If you pause during playback this also sets the new cue
point.
9.Frame search
This is done by first pausing then using the jog
wheel(12) to set the starting point.(When you use the
jog wheel the monitor function allows you to hear what
is playing. Once you have set starting point press
PLAY(18) then CUE (16) to again mute output.)
10.Scanning (fast forward/fast reverse )
To do this rotate Shuttle wheel(11) forward or reverse
You will scan or reverse at 4 different speeds
depending on how much you rotate the wheel.
DISC2
