2
At the Vacuum Power Unit
1. Insert the hose cuff into the inlet adjacent to the vacuum
power unit.
2. Turn the unit on using the ON/OFF switch. When finished,
turn the switch to the OFF position again.
Note: To use the inlets inside the house, the switch must
be in the OFF position.
240 Volt AC (IEC). Power lead
plugs into socket here.
Exhaust
outlet
from
motor
Mounting
bracket for
power unit
Pipe entry
from house
Bucket clips. Unlatch to
remove dust bucket.
Dust bucket
Cyclonic cone to direct
dust into the bucket
Filter screw to allow easy
removal of filter for
cleanng
Filter to protect motor
and keep dust in the dust
bucket
On/Off switch for using
the inlet at the vacuum
unit
Terminal for extra low
voltage wires from inlets.
When the hose is
plugged into the inlet
valve inside the house,
the power unit is
activated.
Reset switch if system
shuts down due to
overload or high running
temperatures.
