DAS AUDIO SOUND E11EVEN DX Series, Руководство пользователя

Страница: 7 / 16

6
INTRODUCTION
Thank you for choosing a DX series amplifier for your application.
Please spend a little time reading through this manual, so that you obtain the best
possible performance from the unit and become familiar with its operating requirements.
All DAS Audio Group products are carefully designed and engineered for cutting-edge
performance and world-class reliability. If you would like further information about this or
any other DAS Audio product, please contact us.
We wish you many years of service from this amplifier and look forward to hearing from
you in the near future.
The DX amplifier series has been designed to combine incredible audio power and
performance with ultra-flexible connectivity for both remote control and audio. Exemplary
audio processing is assured through the use of an external DAS's DSP, or of the DSP
platform in the DXi models, and power amplifier capabilities are taken care of with high
efficiency output stages and a generous power supply.
All units. DX-100 and DX-80, can include optional Dante networked audio.
Accepting analogue, or optional Dante networked audio, this extra connectivity means
that the DX models can also be used in installation systems which already have a
centralized DSP core but require the flexibility of being able to pick up multiple channels
of audio from a network.
With a range of power levels available in the DX series, the amplifiers can be networked to
a single DXi model, creating a powerful, efficient system that's easy to expand and adapt
for use in live, install and everything in between.
INSTALLATION: ELECTRICAL CONSIDERATIONS
The amplifier has been manufactured to comply with your local power supply
requirements, but before connecting the unit to the supply, ensure that the voltage
(printed on the rear panel) is correct.
The amplifier is fitted with either a 100/120V or 220/240V tapped transformer according to
customer requirements.
Make sure power outlets conform to the power requirements listed on the back of the
unit. Damage caused by connecting to improper AC voltage is not covered by the
warranty.
Safety Warning
Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
Where a MAINS plug or appliance coupler is used as the disconnect device, it should
remain readily operable.
Where the amplifier is mounted in a rack and permanently connected to the mains, then
the rack should be installed with a readily accessible connector or an ALL POLE circuit
breaker with 3mm breaking distances.
This unit is fitted with a 3-wire power connector. For safety reasons, THE EARTH LEAD
SHOULD NOT BE DISCONNECTED IN ANY CIRCUMSTANCE. If ground loops are
encountered consult the section on Line Inputs and Outputs on page 11.
E11EVEN SOUND \ DX \ User’s Manual