Darwin FB50, Руководство по сборке и эксплуатации

Страница: 9 / 28

9
Weight bench
FB50
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
2.2 Faults and Troubleshooting
The equipment runs through regular quality controls during production. Nevertheless,
errors or malfunctions on the equipment may occur. Individual parts are often the
cause of faults and replacement is usually sufficient. Please use the following overview
to see the six most common errors and how to repair them. If the equipment still does
not work properly, please contact your contract partner.
Problem Cause Solution
Squeaking & cra-
cking noises
Loose or too tight screw
connection
Check or lubricate screw
connection
2.3 Maintenance and service calendar
The indoor cycle must be cleaned after every training session with a moist towel (no
solvent!) in order to avoid damage caused by sweat.
The following routine work must be executed in the specified time intervals:
Part Weekly Monthly Annually
Check screws
I