![background image](http://html1.mh-extra.com/html/darwin-fitness/tm70-touch/tm70-touch_assembly-and-operating-instructions-manual_3554744024.webp)
24
TM70
Step 11:
Alignment of the Feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
⚠
WARNING
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the section 2.1 of this
manual.
1. Lift the treadmill on the desired side
and rotate the setting screws under the
main frame.
2. Rotate the screws (C30) clockwise in
order to remove them and to raise the
running surface.
3. Rotate them counterclockwise in order
to lower the running surface.
Step 12:
Connecting the Equipment to the Mains Supply
࣑
ATTENTION
The equipment must not be connected
to a multiple socket, otherwise it cannot
be guaranteed that the equipment
will be supplied with sufficient power.
Technical errors can result.
Plug the power plug into a wall outlet
that complies with the instructions in the
chapter on electrical safety.
Содержание TM70 Touch
