Darwin Fitness DF-MS30, Руководство по сборке и эксплуатации

Страница: 13 / 40

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the bolts
using the tool only when you are instructed to do so.
Step 1: Assembly of the main frame and the weight block
1. Assemble the main frame (1) onto the base frame (2) with two screws (48), four washers (64)
and two nuts (61).
2. Mount the two lower weight block cover connectors (70) onto the base frame
(2), each with two screws (18) and two washers (65).
3. Mount the two guide rails (25) onto the base frame (2), each with one screw
(49), two washers (64) and one nut (61).
4. Slide three rubber washers (30) over each of the
guide rails (25).
5. Slide each individual weight plate of the
weight block (13) over the guide rails (25).
6. Insert the weight selector pole (24) into
the weight block (13).
7. Slide the top weight plate (34) over the
guide rails (25).
8. Insert the weight setting pin (44) into one of
the weight plates (13).