Darwin Fitness DF-CAGE, Руководство по сборке и эксплуатации

Страница: 19 / 32

19 Power Cage
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑
ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians..
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Problem Cause Solution
Scraping noises
Cable or pulleys not running
smoothly or are damaged
Perform a visual check of the route of
the cable or of the pulley or of the pulley
guide
Weight is suspended
in the air
Cable is too tightly stretched Readjust cable tension
Cable is not taut Cable is too slack Readjust cable tension
Squeaking & cracking
noises
Screws are either too loose
or too tight
Check that screws are correctly
tightened or lubricate