Daro Saphir Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 24

01787 370187
|
info@darouv.co.uk
|
darouv.co.uk
17
Saphir Pro
13 Press the red button again to access “input photodiode”. This is a
pre-set configuration. Please DO NOT CHANGE.
14 Press the red button again to access “endvalue”. This is pre-set to
100%. Please DO NOT CHANGE.
15 Press the red button again to access “adjust” to calibrate the system.
Using the up button (grey) or down(white) button change “no?” to
“yes” then press enter (red button).
The monitor calibration will then automatically be carried out.
Once this is complete press the red button.