4.
Make sure
Out valve
is in the
Backwash
position and
In valve
is in the
OFF
position
5.
Remove plug from
CIP port
and add 1 ml. of Regular Clorox Bleach using
the CIP syringe
6.
Close the CIP port valve and remove the syringe once all bleach is inserted
7.
Put plug back into the CIP port and rinse syringe with clean water
8.
System is now ready for storage
Replace Pre Filter and Post Filter Cartridge:
1.
Drain unit by turning system off (press down on red power
Switch
) and
wait till gauges read 0 psi.
2.
Using the Filter
Wrench
loosen filter housing
3.
Replace filter cartridge
4.
Hand tighten housing only! Be very careful not to overtighten! (Housing
has an O-Ring to ensure proper seal)
