Before Starting
①
-Solar Power Plug
②
-Wall Power Plug
③
-Red Power Switch
This only has to be performed prior to your first use of the Versa Fresh Pak.
When you first get your Versa Fresh Pak the membrane is preserved with food
grade glycerin that needs to be flushed out. This is a simple procedure that just
takes about 10 minutes using the 2 gray control valves on the Versa Fresh Pak
control panel.
1.
Take out the pre filter and post filter to complete this procedure
2.
The
Out Valve
should be in the
Backwash
through the entire procedure
3.
To flush the membrane set the bottom
In valve
in the
backwash
position
4.
Set up your Versa Fresh Pak with
suction
,
influent
, and
backwash
drain
hoses
5.
Put the
suction hose
into a clean bucket of water and the backwash drain
line to another bucket for later disposal
6.
Turn the Versa Fresh Pak
Switch
on and let the system prime itself
7.
Turn the
In valve
to
Run
position and pressurize the membrane influent and
effluent to about 60 psi
8.
Turn
In valve
from the
Run
position to the
Backwash
, you will notice about
10 seconds of water pressure coming out of the backwash line, this is
flushing the membrane
9.
Repeat step 7 and 8, 20 times to get a good membrane flush, this will take
several minutes to complete
