DARLEY
SCREENGUARD STAINLESS STEEL MESH SECURITY SYSTEM
7
Assembly
Step 1
L seat is mitred in corners as per
frame.
(Ensure L seat is inserted correctly).
Tip: - When inserting L seat, apply Lanotec. This can help speed up the process and make the job easier.
Step 2
Insert Stainless Steel Mesh.
Sheet to be supported to prevent
distortion and to help wedge insertion.
Refer to Diagram (1).
Tip: After stainless steel mesh has been cut to size, corner
tips can be cut at 45 degrees. This will help with the
insertion of the mesh.
Step 3
(1)
Tap in wedge using our manual tool,
automatic air tool or pneumatic hand
tool. Refer to diagrams (2) and (3).
(3)
(2)
Tip 1: After the first wedge has
been inserted, check and measure
your door/window widths (top,
center, bottom and diagonals).
Tip 2: Keep your wedge in its
original condition, store on a flat
surface in a dry cool area.
- 4mm drain holes to be slotted in the bottom frame section. Red = Bottom Rail, Blue = Top Rail.
