Darkly Labs Emblaser Core, Руководство пользователя и сборки

Страница: 4 / 77

FOR YOUR SAFETY
To prevent damage to your Emblaser Device or injury to yourself or to others, read the following
safety precautions carefully. Keep these safety instructions where all those who use the product
will read them.
WARNINGS
Sharp!
Take care of sharp edges and points when
handling all parts in this kit (including the
acrylic frame).
Crack!
Take care when handling all parts in this
kit, some parts will be fragile and prone to
breakage until assembled.
Take care when tightening fasteners. Over
tightened fasteners can damage the parts
around them.
Do not use in wet surroundings
Water and electricity are a dangerous
combination. Ensure your workspace is dry
and not subject to potential wet conditions.
Do not operate the Emblaser Device if
damaged
Damage to any part of the Emblaser Device
could compromise its safety and cause
injury. If any part of the Emblaser Device is
damaged, contact your reseller or Darkly
Labs directly before operation.
Ensure proper supervision of children and
impaired users
The Emblaser Device is not intended for
children under the age of 15 years. Children
under the age of 15 years should be
supervised to ensure they do not play with
the Emblaser Device.
Teenagers aged between 15 and 18 years
can use the Emblaser with the consent and/
or assistance of their parents or persons
who have parental authority over them.
The Emblaser Device is not intended to
be used by persons (including children)
with reduced physical, sensory or mental
capabilities, unless they have been given
supervision or instruction concerning use of
the Emblaser Device by a person responsible
for their safety.
4
●
Darkly Digital Pty Ltd (Darkly Labs) reserves
the right to change the specifications of the
hardware and software described in these
manuals at any time and without prior
notice.
●
While every effort has been made to
ensure that the information in this manuals
is accurate and complete, we would
appreciate it were you to bring any errors
or omissions to the attention of the Darkly
Labs (info@darklylabs.com)