Darkly Labs Emblaser Core Скачать руководство пользователя страница 49

Страница: 49 / 49

PAGE 45

USER MANUAL

Darkly Labs

Terms and Conditions

Terms and Conditions of Use and Purchase

In taking delivery or ownership of the contents of this package (the “Goods”) as manufactured by Darkly Digital Pty Ltd trading
as Darkly Labs (“Darkly Labs” or “Manufacturer) the end-user acknowledges and accepts or agrees that:

(a)

The Goods are intended to provide end-users who are early adopters of a novel technology that is continually being

refined and the Goods will require adjustment and maintenance;

(b)

While specific training qualifications are not necessary to operate the Goods, they should be willing to learn and to

interact with the Manufacturer and the Manufacturer’s user community (www.forum.darklylabs.com).

(c)

The Goods must be operated in accordance with the instructions provided by the Manufacturer. The end-user must

ensure that all safety precautions as recommended by the Manufacturer are followed and that the Goods are not

modified so as to circumvent any safety mechanisms that are part of the Goods.

(d)

Without limiting the warranties provided under the Australian Consumer Law, the Manufacturer’s warranty is on an

Acceptable Quality basis and only covers manufacturing defects, including but not limited to failure or faults with

electrical components including circuit boards, displays, wiring/connectors and motors that affect the Goods ability to

function correctly, as determined by the Manufacturer and parts found to be faulty will be replaced or repaired at the

Manufacturer’s sole discretion and expense. In the event of a major failure you are entitled to a replacement or refund;

(e)

The Manufacturer does not have to repair or replace the Goods if the Goods have been used for a commercial purpose;

misused, improperly or inappropriately installed, operated or repaired; abused; damaged or not maintained in

accordance with the Manufacturer’s instructions. The warranty will become void if repairs are carried out by anyone

not authorized by the Manufacturer to carry out such repairs.

(f)

The end-user is responsible for the cost of freight to return the Goods to Darkly Labs at the address below, or as amended

from time to time. Warranty claims are on a return to base basis. For accepted claims the Manufacturer will cover the

cost of repairs and return freight. To ensure the Goods are transported safely we strongly recommend retaining the

original packaging materials for reuse as/when service is required. Transport damage is the sole responsibility of the

end-user. In the event that repairs or damage is not deemed to be covered under the Manufacturer’s warranty the cost

of the repair and return freight is the responsibility of the end-user. Payment in full is required prior to the Goods being

returned.

(g)

As far as the law permits, Darkly Labs will not be liable for any loss or damage caused to property or persons arising from

any cause whatsoever. The Goods must be constructed and used in strict adherence to the guidelines and instructions

provided by the Manufacturer.

(h)

Except as noted above the Manufacturer does not provide any warranty, express or implied, as to the performance of

the Goods, their merchantability or fitness for a particular purpose.

(i)

The Manufacturer disclaims all liability for claims based on normal wear and tear, misuse or abuse, modification, or

damage to the Goods resulting from any negligent or willful act or omission of the end-user, or the use of the Goods

with any consumables, supplies, equipment, devices or software not manufactured or supplied by the Manufacturer.

(j)

The end-user shall indemnify and hold harmless Darkly Labs against any claim, suit or proceeding arising of or relating

to any exclusions noted in (i) above.

(k)

The end-user will comply with all applicable laws, rules and regulations with respect to the use of the Goods and abide

by all applicable foreign trade/export restrictions or similar rules. In addition the end-user will not transfer, export or re-
export the Goods except in full compliance with all applicable export controls administered by the applicable territory.

Copyright for the GRBL v0.9 software is held by Sunguen K Jeon. The copyright owner has granted Darkly Labs a modified MIT-

License to use the source code of the GRBL v0.9 software.

Darkly Digital, Darkly Labs and the Darkly Labs logo are the trademarks of Darkly Digital Pty Ltd. These trademarks are not

to be used without the written permission of Darkly Digital Pty Ltd. Any unauthorized use of any information, materials or

trademarks and trade names may violate copyright laws, trademark laws, laws of privacy and publicity, and/or other laws and
regulations.

Darkly Labs

10 Baranbali Grove
Greensborough, 3088

Australia

E-mail: [email protected]

Website: www.darklylabs.com